PlasDECK E-Series- Pre-Cut Panels
 TT Custom Marine, Inc. is the number one source for pre-cut PlasDECK E-Series panels to fit any boat. We use heat welding to fabricate our panels into a solid single piece so installation is a breeze. All you have to do is spread out the included adhesive, bed the panels in place and roll out any air bubbles. The process is amazingly simple and the results will astound you. Most boats require little prep work outside of cleaning the deck to eliminate contaminants. Our panels can be glued directly over most fiberglass non-skid patterns without sanding or abrading the surface. In some applications we can even use a patented “peel and stick” adhesive, now that’s easy!
Beware of “Cold Welding” – Cold welding is a method used by some of our competitors to assemble pre-made panels from the raw materials. The “cold welding” process involves gluing the sections of raw material together using an adhesive. In our extensive experience we have yet to see any glue that can hold up to the rigors of expansion and contraction that occur with PVC in the marine environment, especially in Northern climates. If cold welded panels don’t first fall apart during shipping, then the glued seams WILL open up over time on your boat, guaranteed. That’s why seam separation is not covered by these competitors’s absurdly limited warranties. All of the seams on our pre-assembled panels are heat welded, which means that the plastic sections are melted together to physically join them and eliminate the seam altogether. There are no adhesives to fail and no seams to open up over time. The entire panel will expand and contract as one solid, contiguous piece.
Our craftsmen have expertly templated hundreds of the most popular boats and more are added to our library every day. We use sophisticated CNC machines to precision cut our panels to exact tolerances for superior fit and finish. Our business structure allows us to sell you panels that look better and are more durable than most factory installed options, yet cost far less.
Please visit our Online Store for kits we have on file.
 If we don’t have your boat in our template library or you are looking to do a custom job, no problem. We’ll supply you with everything you need to make templates for us, and then manufacture the panels for you. The process is simple using a clear Mylar film that won’t stretch or warp with moisture or temperature. Simply overlay the area and trace using a permanent marker.
Once we have a template we will work with you to develop a design that meets your expectations. Panels can be made with either traditional black or off-white caulking lines and we can inlay custom logos and designs for a truly unique project.
 Contact us today to discuss your project.
“Just a quick note to say thanks for everything. You delivered the PlasDECK E-Series sample as promised and we were able to put it to our own test before ordering. You fabricated it as promised in the timeframe you gave us and you corresponded throughout the process. You sent it as promised in a protected shipping container and you took the time to explain the installation instructions and helpful hints to result in a more desirable outcome. When I ran out of caulking material, you had more in my hands 800 miles away by the following day. All of these points combined; resulted in a wonderful experience and we couldn’t be more pleased with the beautiful finished product. Once again, Thanks for everything,
Steve and Tamara Fish
P.S. I am sure we will be ordering more to do the entire cockpit soon! |
|
